Phone/Whatsapp:
+86 15757872011
Physical address:
malujiao industrizal zone,beibaixiang town,yueqing,zhejiang,china
EVSETOP HN10 -1 Series AC Wallbox EV Charger
Smart EV Wallbox Type 2（IEC 62196-2）AC EV Charger Plug and charge IP65/IK10
Highlights:
- 1-Phase from 3.5kW to 7.4kW
- 3-Phase from 11kW to 22kW
- RFID /Button Allowed
- Bluetooth (Optional)
- Full Protection
- Customize All Types of EV
- Smart APP(Optional)
- 2 Years Warranty
描述
evsetop
RESIDENTIAL USED MODE 3 (IEC61851-1) AC EV CHARGER
EVSETOP EV charger has an IP65 patented design housing, suitable for both outdoor and indoor use.
Customization of all types of charging connectors makes it highly flexible and compatible with all electric vehicles.
Our Features
Driving technology for EV Charging
Easy To Install
Just Secure With Bolts And Nuts And Connect The Electrical Wiring Per The Instructions.
Easy To Use
Possess All The Functions Of The EV Charger, Easy To Operate, Easy To Learn.
Compatible With All
Compatible With All Electric Vehicle Charging, In Line With National Standards.
Minimalist design
The Outdoor Waterproof Rating Of The Shell Reaches IP65, And The Simple Design Meets The Public Aesthetic.
Complete circuit protection
TypeA+6mA DC RCD ,The System Senses The Leakage Current And Will Cut Off The Power Immediately To Protect The User.
Cost-effective
You Can Take Advantage Of Relatively Cheap Electricity Provided By Your Home Grid Compared To Buying Electricity Through A Third Party.
sustainable charging
Connect Your Residential Charging Station To Solar Panels Or 100% Renewable Energy For Zero Emissions. After Installing The EV Charging Station In The Residence, The Charging Cable Can Be Easily Plugged And Unplugged More Than 20,000 Times, Reducing The Overall Carbon Footprint.
DYNAMIC LOAD BALANCING FUNCTION
● Limit the total charging load to protect the local grid
● DLB (Dynamic Load Balancing) when the EV charger is working with other household appliances at the same time, the DLB box can maintain the dynamic balance of the total household current and ensure the safety of electricity to avoid home over load.
● Open CT (current transformer) is selected as the current sensor, there is no physical wiring between devices, it has the advantages of open and close installation, convenient and fast wiring, and no additional infrastructure or installation costs.
CHARGING METHOD
● Plug and play: If you have a private parking lot and no one else can use the charger, then you can choose the “plug and play” mode.
● RFID Card: If you install your EV charger outside and someone has access to it, you can use an RFID card to start and stop charging.
● Remote Control via App: Our M3W EV charger supports remote control via App via OCPP 1.6J. If you have your own application, we can provide technical services to connect your application. Now we have also completed the development of our own home user App.
SMART CHARGING
● Our application has finished development and is now being tested. All new M3W wall mount EV chargers can use the app for a smart charging experience.
● Current Adjustment: You can easily adjust the charge current to suit a balanced load.
● Flexible appointment function: App supports paid appointments, allowing you to start automatically anytime, anywhere. Choose a cost-effective period.
● Charging Report: All your charging records will be collected and made into reports.
● WIFI Configuration: You can easily configure the wifi of the EV charger with APP.
| Power Specification | ||||
| Phase number | 1-phase | 3-phase | ||
| Model | HN10116 | HN10132 | HN10316 | HN10332 |
| AC Power Input Rating | 230VAC,50/60Hz | 400VAC,50/60Hz | ||
| Power Wiring | 3Wire-L1,N plus PE | 5Wire-L1,L2,L3,N plus PE | ||
| AC Output Rating Power | 3.5kW | 7kW | 11kW | 22kW |
| AC Output Rating Current | 16A | 32A | 16A | 32A |
| ConnectorType | IEC 62196-2,Type 2 Plug + 5m Charging Cable | |||
| Connector Mechanical Operating Life | 210000 Times (Plug In & Pull Out With No Load) | |||
| User Interface & Control | ||||
| Charging Control | APP-controlled (Bluetooth Version), Button-controlled, Card-controlled | |||
| Indicators | 1 LED Indicator with multiple colors -Power/ Charging/ Fault | |||
| Communication interface (Optional) | Bluetooth | |||
| OCPP Protocol (Optional) | OCPP 1.6J(via Ethernet, Wifi or 4G-LTE) | |||
| Communication protocol (Optional) | ModbusTCP (via Ethernet) | |||
| Communication protocol (Optional) | Dedicated communication protocol (via RS-485) | |||
| Environmental | ||||
| Storage Temperature | -40 to 75°C ambient | |||
| Operating Temperature | -30 to 55°C ambient | |||
| Operating Humidity | Upto 95% non-condensing | |||
| Altitude | < 2000m | |||
| Protection | ||||
| IP Code | IP65 | Over Voltage Protection | Yes | |
| Short Circuit Protection | Yes | Under Voltage Protection | Yes | |
| Over Load Protection | Yes | Over-temp Protection | Yes | |
| Leakage Fault Protection | DC 6mA current fault protection built-in. Need to installs Residual-current-operated circuit breaker of at least type A (30mA trip current) to protect Leakage fault. | |||
| Ground Protection | designed forTN-C-S power supply system | |||
| No earth electrodes Protection | Optional, designed for the UK and other regions using TN-C power supply ^stem | |||
| Optional Function | ||||
| Load balance via PLC | Work with PLC version M3 Charge-Mate (required additional purchase) | |||
| Wallbox Mechanical | ||||
| Dimension (HxWxD, mm) | 180x180x65 | |||
| Weight | <6kg | |||
| Charging Cable Length (Total) | 5m or customize length (w7.5m) | |||
| Enclosure Material | An external Case B charging socket without charging cable is optional PC (White) | |||
| Mounting Pole Mechanical (Optional) | ||||
| Dimension (HxWxD, mm) | 1117x240x112 | |||
| Weight | <5kg | |||
| Enclosure Material | Stainless steel | |||
| OEM Customize Options | ||||
| Logo on Front panel | Yes | Nameplate | Yes | |
| User manual | Yes | Length of charging cable | Yes | |
Previous
Next
成为第一个“EVSETOP HN10 -1 Series AC Wallbox EV Charger” 的评价者
评价
目前还没有评价