RESIDENTIAL USED MODE 3 (IEC61851-1) AC EV CHARGER
EVSETOP EV charger has an IP65 patented design housing, suitable for both outdoor and indoor use.
Customization of all types of charging connectors makes it highly flexible and compatible with all electric vehicles.
Our Features
Driving technology for EV Charging
Easy To Install
Just Secure With Bolts And Nuts And Connect The Electrical Wiring Per The Instructions.
Easy To Use
Possess All The Functions Of The EV Charger, Easy To Operate, Easy To Learn.
Compatible With All
Compatible With All Electric Vehicle Charging, In Line With National Standards.
Design
Our Charger Shell That Meets Aesthetic Requirements And Has Outdoor Waterproof Protection.
PEN Fault Detection
Built-in Type B RCD for Leakage Protection With
Over Temperature Sensor.
Full Certification Testing
Our Products Have All Certifications And Product Test Reports.
Support
Compatible With All Electric Vehicles, Special Customization Service Available.
DYNAMIC LOAD BALANCING FUNCTION
● Limit the total charging load to protect the local grid
● Shared charging load reduces cost of required electrical connections
● Open CT (current transformer) is selected as the current sensor, there is no physical wiring between devices, it has the advantages of open and close installation, convenient and fast wiring, and no additional infrastructure or installation costs.
CHARGING METHOD
● Plug and play: If you have a private parking lot and no one else can use the charger, then you can choose the “plug and play” mode.
● RFID Card: If you install your EV charger outside and someone has access to it, you can use an RFID card to start and stop charging.
● Remote Control via App: Our M3W EV charger supports remote control via App via OCPP 1.6J. If you have your own application, we can provide technical services to connect your application. Now we have also completed the development of our own home user App.
SMART CHARGING
● Our application has finished development and is now being tested. All new M3W wall mount EV chargers can use the app for a smart charging experience.
● Current Adjustment: You can easily adjust the charge current to suit a balanced load.
● Flexible appointment function: App supports paid appointments, allowing you to start automatically anytime, anywhere. Choose a cost-effective period.
● Charging Report: All your charging records will be collected and made into reports.
● WIFI Configuration: You can easily configure the wifi of the EV charger with APP.
Power Specification
Phase number
1-phase
3-phase
Model
M3W116EN/
M3W132ENZ
M3W316EN/
M3W332ENZ
M3B116EN
M3B132EN
M3B316EN
M3B332EN
AC Power Input Rating
230VAC, 50/60Hz
400VAC,50/60Hz
Power Wiring
3Wire-L1,N plusPE
5Wire-L1,L2,L3,NplusPE
AC Output Rating Power
3.5kW
7kW
11kW
22kW
AC Output Rating Current
16A
32A
16A
32A
ConnectorType
IEC 62196-2,Type 2 plug + 5m charging cable
Connector Mechanical Operating Life
N10000 times (Plug in & pull out with no load)
User Interface & Control
Charging Control
Plug and Play, RFID Card or APP
Display screen
4.3-inch LCD screen
Indicators
4 LED Indicators-Power/Connect/ Charging/ Fault
Communication interface
Ethernet (RJ-45), Wifi (2.4GHz)
Communication interface (Optional)
4G-LTE, RS-485
OCPP Protocol (Optional)
OCPP 1.6J(via Ethernet, Wifi or 4G-LTE)
Communication protocol (Optional)
ModbusTCP (via Ethernet)
Communication protocol (Optional)
Dedicated communication protocol (via RS-485)
Environmental
Storage Temperature
-40 to 75°C ambient
Operating Temperature
-30 to 55°C ambient
Operating Humidity
Upto 95% non-condensing
Altitude
< 2000m
Protection
IP Code
IP54
Over Voltage Protection
Yes
Short Circuit Protection
Yes
Under Voltage Protection
Yes
Over Load Protection
Yes
Over-temp Protection
Yes
Power line protection
Yes, report the fault of exchange connection of Live wire & Neutral wire
Leakage Protection
Yes, Type B Residual Current Monitoring Unit built-in.
Ground Protection
Yes, designed forTN-C-S power supply system
Optional Function
Load balance via PLC
Work with PLC version M3 Charge-Mate (required additional purchase)
Wallbox Mechanical
Dimension (HxWxD, mm)
410x260x140
Weight
1-Phsae≤ 9kg;3-Phsae≤ 11kg
Charging Cable Length (total)
5m or customize length (w7.5m)
Enclosure Material
Front panel: Black, Tempered Glass; Back cover: Gray, Metal Plate