EVSETOP HN10 Series AC Wallbox EV Charger

EVSETOP HN10 Series AC Wallbox EV Charger

Smart EV Wallbox Type 2(IEC 62196-2)AC EV Charger Plug and charge IP65/IK10

Highlights:

  • 1-Phase from 3.5kW to 7.4kW
  • 3-Phase from 11kW to 22kW
  • RFID /Button Allowed
  • Bluetooth (Optional)
  • Full Protection
  • Customize All Types of EV
  • Smart APP(Optional)
  • 2 Years Warranty

描述

evsetop

RESIDENTIAL USED MODE 3 (IEC61851-1) AC EV CHARGER

EVSETOP EV charger has an IP65 patented design housing, suitable for both outdoor and indoor use.

Customization of all types of charging connectors makes it highly flexible and compatible with all electric vehicles.

 

Our Features

Driving technology for EV Charging

Easy To Install

Just Secure With Bolts And Nuts And Connect The Electrical Wiring Per The Instructions.

Easy To Use

Possess All The Functions Of The EV Charger, Easy To Operate, Easy To Learn.

Compatible With All

Compatible With All Electric Vehicle Charging, In Line With National Standards.

Minimalist design

The Outdoor Waterproof Rating Of The Shell Reaches IP65, And The Simple Design Meets The Public Aesthetic.

Complete circuit protection

TypeA+6mA DC RCD ,The System Senses The Leakage Current And Will Cut Off The Power Immediately To Protect The User.

Cost-effective

You Can Take Advantage Of Relatively Cheap Electricity Provided By Your Home Grid Compared To Buying Electricity Through A Third Party.

sustainable charging

Connect Your Residential Charging Station To Solar Panels Or 100% Renewable Energy For Zero Emissions. After Installing The EV Charging Station In The Residence, The Charging Cable Can Be Easily Plugged And Unplugged More Than 20,000 Times, Reducing The Overall Carbon Footprint.

DYNAMIC LOAD BALANCING FUNCTION

● Limit the total charging load to protect the local grid

● DLB (Dynamic Load Balancing) when the EV charger is working with other household appliances at the same time, the DLB box can maintain the dynamic balance of the total household current and ensure the safety of electricity to avoid home over load.

● Open CT (current transformer) is selected as the current sensor, there is no physical wiring between devices, it has the advantages of open and close installation, convenient and fast wiring, and no additional infrastructure or installation costs.

CHARGING METHOD

● Plug and play: If you have a private parking lot and no one else can use the charger, then you can choose the “plug and play” mode.

● RFID Card: If you install your EV charger outside and someone has access to it, you can use an RFID card to start and stop charging.

● Remote Control via App: Our M3W EV charger supports remote control via App via OCPP 1.6J. If you have your own application, we can provide technical services to connect your application. Now we have also completed the development of our own home user App.

SMART CHARGING

Our application has finished development and is now being tested. All new M3W wall mount EV chargers can use the app for a smart charging experience.

● Current Adjustment: You can easily adjust the charge current to suit a balanced load.

● Flexible appointment function: App supports paid appointments, allowing you to start automatically anytime, anywhere. Choose a cost-effective period.

● Charging Report: All your charging records will be collected and made into reports.

● WIFI Configuration: You can easily configure the wifi of the EV charger with APP.

Power Specification
Phase number1-phase3-phase
ModelHN10116HN10132HN10316HN10332
AC Power Input Rating230VAC,50/60Hz400VAC,50/60Hz
Power Wiring3Wire-L1,N plus PE5Wire-L1,L2,L3,N plus PE
AC Output Rating Power3.5kW7kW11kW22kW
AC Output Rating Current16A32A16A32A
ConnectorTypeIEC 62196-2,Type 2 Plug + 5m Charging Cable
Connector Mechanical Operating Life210000 Times (Plug In & Pull Out With No Load)
User Interface & Control
Charging ControlAPP-controlled (Bluetooth Version), Button-controlled, Card-controlled
Indicators1 LED Indicator with multiple colors -Power/ Charging/ Fault
Communication interface (Optional)Bluetooth
OCPP Protocol (Optional)OCPP 1.6J(via Ethernet, Wifi or 4G-LTE)
Communication protocol (Optional)ModbusTCP (via Ethernet)
Communication protocol (Optional)Dedicated communication protocol (via RS-485)
Environmental
Storage Temperature-40 to 75°C ambient
Operating Temperature-30 to 55°C ambient
Operating HumidityUpto 95% non-condensing
Altitude< 2000m
Protection
IP CodeIP65Over Voltage ProtectionYes
Short Circuit ProtectionYesUnder Voltage ProtectionYes
Over Load ProtectionYesOver-temp ProtectionYes
Leakage Fault ProtectionDC 6mA current fault protection built-in.
Need to installs Residual-current-operated circuit breaker of at least type A (30mA trip current) to protect Leakage fault.
Ground Protectiondesigned forTN-C-S power supply system
No earth electrodes ProtectionOptional, designed for the UK and other regions using TN-C power supply ^stem
Optional Function
Load balance via PLCWork with PLC version M3 Charge-Mate (required additional purchase)
Wallbox Mechanical
Dimension (HxWxD, mm)180x180x65
Weight<6kg
Charging Cable Length (Total)5m or customize length (w7.5m)
Enclosure MaterialAn external Case B charging socket without charging cable is optional PC (White)
Mounting Pole Mechanical (Optional)
Dimension (HxWxD, mm)1117x240x112
Weight<5kg
Enclosure MaterialStainless steel
OEM Customize Options
Logo on Front panelYesNameplateYes
User manualYesLength of charging cableYes
Public parking Project
Northern Ireland
Outdoor Project
France
Rural Project
Italy
Previous
Next

评价

目前还没有评价

成为第一个“EVSETOP HN10 Series AC Wallbox EV Charger” 的评价者

您的电子邮箱地址不会被公开。 必填项已用*标注